Fluid Foundation

Author Image

By: TOM BRANNA

Editor

Fluid Foundation
Ingredients
%

Phase A

  • Dow Corning ES-5612 (PEG-10 dimethicone)
  • 8.00
  • Xiameter PMX-200 silicone fluid, 5 cSt (Dow Corning) (Dimethicone)
  • 7.57
  • Dow Corning FZ-3196 (Caprylyl methicone)
  • 7.57
  • Dow Corning 5200 (Lauryl PEG/PPG-18/18 methicone)
  • 0.80
  • Dow Corning VM-2270 Aerogel Fine Particles (Silica silylate)
  • 0.30

Phase B

  • Water
  • 51.00
  • Glycerin
  • 5.00
  • Sodium chloride (Sodium chloride) (VEL)
  • 1.00
  • Euxyl PE 9010 (Schulke & Mayr) (Phenoxyethanol (and) ethylhexylglycerin)
  • 1.00

Phase C

  • SA-C47051 (Miyoshi Kasei) (Titanium iron oxide (and) dimethicone)
  • 9.66
  • C33-1700 (CI 77492) (Sun Chemical Corporation)
  • 1.81
  • C33-2199 (CI 77491) (Sun Chemical Corporation)
  • 0.42
  • C33-5000 (CI 77499) (Sun Chemical Corporation)
  • 0.12
  • Dow Corning FZ-3196 (Caprylyl methicone)
  • 5.45

Phase D

  • Perfume (Domino 246519) (Symrise)
  • 0.30

Procedure

Prepare a pigment premix by blending phase C ingredients with a three-roll mill, and homogenize until uniform in color. Combine ingredients of phase A and phase C, mixing until homogeneous. Combine ingredients of phase B. Slowly add phase B into phase AC, while gradually increasing mixing speed (800 to 1100 rpm). When B is completely added, add phase D with mixing. Mix for an additional 5 minutes at 2000 rpm.

More Information

Dow Corning Corporation
(989) 496-6000 • Email: [email protected]
Website: www.dowcorning.com/content/personal/